On May 18 I had installed the new CSP 1.80 and the new CM (for 1.80), downloading them from the x4fab patreon.
Unfortunately I noticed a series of problems compared to my previous CSP version 1.73 (and previous CM); in particular I verified that, with the CSP 1.80 (with its default parameters):
- The CPU load has increased from about 53 to 64, but above all with CSP 1.80 I have some "freezes" of about one/two seconds (no freeze with CSP 1.73)
- In some tracks (mods) the driving got worse with many more inputs on the steering wheel, in terms of strong and annoying "spiking/jerks" so not an improvement of the feedback, rather a worsening so as to force me to set a "filter" at the FFB to avoid damages to my wheel (fanatec CSW 2.5)
- My favorite mods (RSS70 and F1_1971 by thr/rainmaker) got worse in terms of driving and behavior (very different and less effective braking, more understeer, less stable in general when cornering)
- The AIs have changed their behavior, in particular at the start the cars behind me started very slowly and therefore the cars in front of me and I immediately distanced ourselves a lot in the first 10-15 seconds
- My favorite PPFilter, i.e. “default” has changed and is now “darker”
Consequently I decided to revert to the previous version both for the CM and for the CSP (1.73), but the behavior of the cars hasn't changed; I consequently also copied (from a save I had made before) the whole "extension" folder and at this point everything is back to normal as it was before.
As a question I wanted to ask, since sooner or later I have to switch to new versions anyway:
- What parameters of CSP 1.80 (and how) do I have to modify them to have tracks and cars behave like in 1.73 ?
- For AI it should be sufficient to uncheck all the new parameters in the "AI BEHAVIOUR" is this correct?
Any help would be much appreciated
Unfortunately I noticed a series of problems compared to my previous CSP version 1.73 (and previous CM); in particular I verified that, with the CSP 1.80 (with its default parameters):
- The CPU load has increased from about 53 to 64, but above all with CSP 1.80 I have some "freezes" of about one/two seconds (no freeze with CSP 1.73)
- In some tracks (mods) the driving got worse with many more inputs on the steering wheel, in terms of strong and annoying "spiking/jerks" so not an improvement of the feedback, rather a worsening so as to force me to set a "filter" at the FFB to avoid damages to my wheel (fanatec CSW 2.5)
- My favorite mods (RSS70 and F1_1971 by thr/rainmaker) got worse in terms of driving and behavior (very different and less effective braking, more understeer, less stable in general when cornering)
- The AIs have changed their behavior, in particular at the start the cars behind me started very slowly and therefore the cars in front of me and I immediately distanced ourselves a lot in the first 10-15 seconds
- My favorite PPFilter, i.e. “default” has changed and is now “darker”
Consequently I decided to revert to the previous version both for the CM and for the CSP (1.73), but the behavior of the cars hasn't changed; I consequently also copied (from a save I had made before) the whole "extension" folder and at this point everything is back to normal as it was before.
As a question I wanted to ask, since sooner or later I have to switch to new versions anyway:
- What parameters of CSP 1.80 (and how) do I have to modify them to have tracks and cars behave like in 1.73 ?
- For AI it should be sufficient to uncheck all the new parameters in the "AI BEHAVIOUR" is this correct?
Any help would be much appreciated
